> >>SOUND DEVICES MIXPRE-D

Mixer SOUND DEVICES MIXPRE-D

In stock SOUND DEVICES

LMIXSOUMIXPRED

Date pick-up / return

32,00 €/jour

tax excl.

MixPre-D Two-input two-output Field Mixer with USB interface. 

More details

Add to Compare
Add to wishlist

The MixPre-D sets a new standard for compact, high-performance portable audio mixers. Powered by only two-AA batteries or 10-18 VDC, the MixPre-D is designed specifically for audio professionals needing the most flexible connectivity in production applications where capturing great sound is important, but size and weight are a concern. The MixPre-D is also a class compliant USB portable audio hardware interface for Mac OS, Windows or Linux computers.

Size and Specs :

  • Frequency Response : 20 Hz - 30 kHz, +0.2, -0.5 dB (relative to 1 kHz level with 150 ohm source, gain controls set at 50%)
  • Equivalent Input Noise : -126 dBu (-128 dBV) maximum mic in to line out.
  • Input Clipping : -10 dBu minimum (mic level), +28 dBu minimum (line level)
  • Output Clipping Level Line: +22 dBu minimum ; Mic: -18 dBu minimum 
  • Gain Mic to Line, max : 66 dB
  • Gain Line to Line, max : 26 dB
  • Gain Line to Mic, max : -14 dB
  • Gain Mic to Mic, max : 26 dB
  • Gain Mic (TA3) relative to Line out : -36 dB
  • Dynamic Range : 110 dB minimum, mic input to line output
  • Total harmonic distortion + Noise : 0.05% maximum
  • Common Mode Rejection Ratio : 100 dB minimum at 80 Hz, 60 dB minimum at 10 kHz
  • Inputs : Transformer-balanced, 2k mic input impedance, 16k line input impedance
  • Outputs XLR-Line/Mic : active-balanced, 100 ohm output impedance
  • Outputs XLR-AES3 : balanced, 110 ohm, two-channel, on right XLR connector
  • Outputs TA3 : unbalanced mic-level output, pin-2 left, pin-3 right, pin-1 ground, 200 ohm output impedance
  • Outputs Tape (jack 3.5 mm) : Unbalanced, tip-left, ring-right, sleeve-ground, 2.1k ohm output impedance
  • A/D Converter for USB : 103 dB typical, A-weighted; sample rate selectable 44.1k, 48k, or 96k
  • Output Noise : -100 dBu (-102 dBV) maximum 
  • High Pass Filters : 80 Hz or 160 Hz, 6 dB per octave
  • Phantom Power : 12-volt through 680 ohm resistors or 48-volt through 6.8k resistors
  • Limiter : Threshold adjustable, +8 dBu to +18 dBu, 20:1 limiting ratio, 1 mS attack time, 200 mS release time.
  • Metering : 16 segment x 2 GaN (Gallium Nitride) meters, peak + VU responding, wicked bright
  • Internal power supply : 2 AA alkaline batteries, 4 hours life typical, no phantom power
  • External power supply : 10-17 VDC via 4-pin Hirose, pin 4 = +, pin 1 = -, completely isolated floating supply
  • USB Connectivity : USB class-compliant device, analog input to USB output, USB monitoring in headphones
  • Operating temperatures : -20°C to 60°C, 0 to 95% relative humidity; (non-condensing), storage: -40°C to 85°C
  • Weight : 0.7 kg, 1.5 lbs with batteries
  • Dimensions : 43 mm x 94 mm x 140 mm (h x l x p), (1.7" x 3.7" x 5.5")

No customer reviews for the moment.

Write a review

SOUND DEVICES MIXPRE 3

Accessories

13 other products in the same category:

Accept

Site use cookies