Systems WISYCOM BUNDLE MCR42 + MTP41S

WISYCOM

VHFWISBUNDLEMTP41

6 250,00 €

tax excl.

"Bundle" pack composed of : 1MCR 42, 2 MPT 41S, 1 BAPT. 

More details

Transmitter :  MPT41S

MTP40S is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications like TV reportage or movies. Very easy and quick to use thanks to OLED display, dedicated buttons and a joggle selector. MTP40S benefit also of the latest Wisycom RF technology along with an enhanced robustness against noise and inter-modulation.

Features :

  • LCD display (128 x 32 pixels)
  • Integrated HW limiter
  • Up to 232 MHz bandwidth in 470/798 MHz range
  • "Ultra-light" metal alloy body (60g without batteries)
  • User selectable multi-companding systems :
        ENR (noise optimized)
        ENC (voice optimized)
  • Battery: 1 AA Alkaline, rechargeable NiMH or Lithium
  • Autonomy:  > 5h @ 50mW output power ; > 7h @ 10mW output power
  • Infrared interface for management and firmware update
  • Max input level 26dBu (15.5 V clipping)

Receiver : MCR42S

Wisycom MCR42S is a wide bandwidth dual receiver that can directly be plugged to certain kinds of cameras (Panasonic, Sony, Grass Valley) with suited slot. This very intuitive device is a true dual diversity. The MCR42S features a built-in scan function and is compatible with Audio Limited TX 2000-2040 , Sennheiser SK, Evolution G2 G3.

Features :

  • Switching bandwidth : 232 MHz.
  • 2 BP choices : MCR-L : 470-678 MHz MCR-H : 590-822 MHz.
  • 40 groups of 60 channels in 25KHz steps. 
  • Frequencies programmable by our technicians
  • Outputs : RX 1 and RX 2 in TA3/M / Analog ou AES.
  • Output levels : tunable in 1 dB steps from -20dB to + 6 dBu (nominal).
  • Powering : External : Hirose connector / Internal :  BCA 42 batteries module : 5* LR06.
  • Dimensions : (H x L x W) : 6,8 cm x 1,8 cm x 13.5 cm
  • Weight : 180 g

Slot : BPA HPN

BPA HPN slot is a output block for the MCR 42 which adds a MiniJack 3.5mm plug for an output listening. 

No customer reviews for the moment.

Write a review

SENNHEISER EW 112 P

RF transmitter/receiver set with omni-directional microphone. 

- WISYCOM MCR42S :

Frequency rangesN band   470 ÷ 700 MHz
M band   566 ÷ 798 MHz
Extended limits or other custom ranges are available on request
Switchable channels40 groups of 60 channels fully user progr
Switching-windowup 240 MHz
Frequenciesmicroprocessor controlled frequency synthesizer circuit, with 25 kHz minimum step. The frequencies is easily PC reprogrammed with the optional UPK 300E Programming Kit
Frequency error< ± 2.5 ppm, in the rated temperature range
Temperature range-10 ÷ +55 °C
ModulationFM, with 50 μs de-emphasis
Nominal deviation±40 kHz (Max. operating dev. = ± 60 kHz)
“A” / “B” antenna inputswith sturdy connectors
Antenna input impedance50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity2 μV ( 0 dBμV), for SND/N > 58 dB
5 μV (14 dBμV), for SND/N > 98 dB
in the whole switching-window [*]
Amplitude response< 0.5 dB (RF input sig.:6 dBμV ÷ 100 dBμV)
Co-channel rejection> 2.5 dB
Adjacent chan. selectivity> 80 dB typical (for ch. spacing ≥ 400 kHz)
Spurious rec. rejection> 100 dB
IF image rejection> 90 dB
Intermod. rejection> 76 dB
IIP3> +10 dBm typical
Spurious emissions< 2 nW (typical = 0.1 pW)
Noise Reduction systemENR (Wisycom Extended-NR), noise optimized
ENC (Wisycom Extended-NC), voice optimized & with reduced pre-emphasys
Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth30 Hz ÷ 20 kHz
Frequency response± 0.5 dB in the 30 Hz ÷ 19 kHz range
Distortion• MCR42S: 0.3 % typical • MCR42S2: 0.1 % typical
SND/D ratio (Analogue)110 dB typical [*]
SND/D ratio (AES3)• MCR42S: >125 dB typical [*] • MCR42S2: >140 dB typical [*]
POWER LEDs
(OLD display, discontinued)
2 multicolor RGB LEDs to easy indicate Rx1 & Rx2 power status:
GREEN, if "Receiver ON" with external power supply;
RED, if Empty battery/power supply;
LEDs blinking indicates power supply status of transmitter:
    - slow blinking, at 25% battery capacity;
    - fast blinking, at 12.5% battery capacity.
POWER LEDs
(NEW display)
1 multicolour RGB LEDs to easy indicate Rx1 & Rx2 power status:
GREEN/PALE GREEN if "Receivers ON" with external power supply/battery;
GREEN blinking/PALE GREEN blinking if low power supply/ low battery level
RED blinking indicates power supply status of transmitter:
    - slow blinking, at 25% battery capacity;
    - fast blinking, at 12.5% battery capacity.
RF LEDs2 multicolor RGB LEDs to easy indicates Rx1 & Rx2 RF status. Always on in normal operation:
RED, if both receivers RF level is under squelch level;
GREEN, if signal above squelch level & antenna A (green) is active;
BLUE, if signal above squelch level & antenna B (blue) is active;
YELLOW, if signal above squelch and both antenna are used.
AUDIO LEDs2 multicolor RGB LEDs to easy indicates Rx1 & Rx2 audio status:
RED, if audio is muted cause of squelch (or tone squelch if active)
GREEN, if audio is active and tone squelch present
BLUE, if audio is active and tone squelch not present
Front buttonssimple operation with 4 buttons to quickly monitor and setup the receiver
One touch function for a frequency scan and sync function
PoweringExternal = 5 ÷ 18 Vdc (1.5 W max)
Autonomous. = with optional BCA 42 Battery Module (5 x IEC-LR6 1.5V size-AA alkaline or rechargeable elements)
Dimensions“Slot-in” execution= 68 x 18 x 115 mm, “Stand-alone” exec. = 68 x 18 x 135 mm
Weight180 g approx.
Analogue Audio Output• Audio line-output electronically balanced on two 3 pin mini-XLR Female connector
• Audio line-output level Adjustable in a one dB step between: -30/-18 (depending on the HW vers.) and +6 dBu (nominal) and MAX +12 dBu (peak deviation)
• Audio line-output imped. ≤ 200 ohm
Push to Talk (PTT) Audio Outputelectronically balanced on a 5 pin mini-XLR Male connector
Digital Audio Output• electronically balanced on 3 pin mini-XLR Male connector
• AES3 @ 48 kHz

[*] RMS value, 22 Hz / 22 kHz, unweighted

- WISYCOM MTP41S :

Switchable channels2400 allocated by 40 groups of 60 channels (in specific frequency range), quickly selectable with dedicated buttons
Switching windowUp to 232 MHz, depending on band
1 470 ÷ 640 MHz
2 566 ÷ 798 MHz
3 510 ÷ 698 MHz
FrequenciesQuartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability± 2,5 ppm (in the rated temperature range)
Temperature range-10 ÷ +55 °C
Max RF power50 mW (ERP) when high power selected
10 mW (ERP) when low power selected
Spurious emissions< 2 nW
Modulationwideband FM, with 50 µs pre-emphasis
Nominal deviation±40 kHz (Peak deviation = ±56 kHz)
Telemetry featureMTP41 transmits also a digitally modulated sub-carrier, suitable for: tone-squelch operating remote battery monitoring optional PTT (push to talk) operation
AF input connector LEMO optionConfigurable on ‘mic’ display menu in 3 options:
’2 wires’: gain selectable -40 ÷ +40 (-54 dBu ÷ +26 dBu peak), no bias voltage
‘2 wires + bias’: gain selectable -20 ÷ +40 (-54 dBu ÷ + 6 dBu peak), 5.5 V on 4k7 bias supply
‘3 wires: gain selectable -40 ÷ +40 (-54 dBu ÷ +26 dBu peak)
AF input level :
80 dB adjustable range from -60 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max. input level+26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Noise-ReductionENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth45 Hz ÷ 21 KHz (3dB)
55 Hz ÷ 20 KHz (1dB)
Distortion< 0.3 % (0.15 % typ.)
Signal-to-noise ratiotyp. 115 dB (A)rms with 40 kHz deviation
typ. 121 dB (A)rms with 56 kHz deviation
LedLed indication with bicolor led (red & green) on wireless power switch:
Wireless transmission status: GREEN on/off
Modulation peek (if activated): RED
Battery lifetime status: GREEN - steady (> 25%) - slowly blinking (< 25%) - quickly blinking (<12%)
Ptt status: RED if active
DisplayHigh contrast OLED (Organic light-emitting diode) bicolor display (96 x 36 pixels)
8 step battery lifetime indication: 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT functionPin 3 of the AF connector can be setup to an external push button
Power supply1 AA size batteries (Alkaline, rechargeable NiMH)
Battery lifeapprox. 5 hours @ 50mW continuous working
approx. 7 hours @ 10mW continuous working
WeightApprox. 75 g. without batteries

- WISYCOM MCR42S :

Frequency rangesN band   470 ÷ 700 MHz
M band   566 ÷ 798 MHz
Extended limits or other custom ranges are available on request
Switchable channels40 groups of 60 channels fully user progr
Switching-windowup 240 MHz
Frequenciesmicroprocessor controlled frequency synthesizer circuit, with 25 kHz minimum step. The frequencies is easily PC reprogrammed with the optional UPK 300E Programming Kit
Frequency error< ± 2.5 ppm, in the rated temperature range
Temperature range-10 ÷ +55 °C
ModulationFM, with 50 μs de-emphasis
Nominal deviation±40 kHz (Max. operating dev. = ± 60 kHz)
“A” / “B” antenna inputswith sturdy connectors
Antenna input impedance50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity2 μV ( 0 dBμV), for SND/N > 58 dB
5 μV (14 dBμV), for SND/N > 98 dB
in the whole switching-window [*]
Amplitude response< 0.5 dB (RF input sig.:6 dBμV ÷ 100 dBμV)
Co-channel rejection> 2.5 dB
Adjacent chan. selectivity> 80 dB typical (for ch. spacing ≥ 400 kHz)
Spurious rec. rejection> 100 dB
IF image rejection> 90 dB
Intermod. rejection> 76 dB
IIP3> +10 dBm typical
Spurious emissions< 2 nW (typical = 0.1 pW)
Noise Reduction systemENR (Wisycom Extended-NR), noise optimized
ENC (Wisycom Extended-NC), voice optimized & with reduced pre-emphasys
Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth30 Hz ÷ 20 kHz
Frequency response± 0.5 dB in the 30 Hz ÷ 19 kHz range
Distortion• MCR42S: 0.3 % typical • MCR42S2: 0.1 % typical
SND/D ratio (Analogue)110 dB typical [*]
SND/D ratio (AES3)• MCR42S: >125 dB typical [*] • MCR42S2: >140 dB typical [*]
POWER LEDs
(OLD display, discontinued)
2 multicolor RGB LEDs to easy indicate Rx1 & Rx2 power status:
GREEN, if "Receiver ON" with external power supply;
RED, if Empty battery/power supply;
LEDs blinking indicates power supply status of transmitter:
    - slow blinking, at 25% battery capacity;
    - fast blinking, at 12.5% battery capacity.
POWER LEDs
(NEW display)
1 multicolour RGB LEDs to easy indicate Rx1 & Rx2 power status:
GREEN/PALE GREEN if "Receivers ON" with external power supply/battery;
GREEN blinking/PALE GREEN blinking if low power supply/ low battery level
RED blinking indicates power supply status of transmitter:
    - slow blinking, at 25% battery capacity;
    - fast blinking, at 12.5% battery capacity.
RF LEDs2 multicolor RGB LEDs to easy indicates Rx1 & Rx2 RF status. Always on in normal operation:
RED, if both receivers RF level is under squelch level;
GREEN, if signal above squelch level & antenna A (green) is active;
BLUE, if signal above squelch level & antenna B (blue) is active;
YELLOW, if signal above squelch and both antenna are used.
AUDIO LEDs2 multicolor RGB LEDs to easy indicates Rx1 & Rx2 audio status:
RED, if audio is muted cause of squelch (or tone squelch if active)
GREEN, if audio is active and tone squelch present
BLUE, if audio is active and tone squelch not present
Front buttonssimple operation with 4 buttons to quickly monitor and setup the receiver
One touch function for a frequency scan and sync function
PoweringExternal = 5 ÷ 18 Vdc (1.5 W max)
Autonomous. = with optional BCA 42 Battery Module (5 x IEC-LR6 1.5V size-AA alkaline or rechargeable elements)
Dimensions“Slot-in” execution= 68 x 18 x 115 mm, “Stand-alone” exec. = 68 x 18 x 135 mm
Weight180 g approx.
Analogue Audio Output• Audio line-output electronically balanced on two 3 pin mini-XLR Female connector
• Audio line-output level Adjustable in a one dB step between: -30/-18 (depending on the HW vers.) and +6 dBu (nominal) and MAX +12 dBu (peak deviation)
• Audio line-output imped. ≤ 200 ohm
Push to Talk (PTT) Audio Outputelectronically balanced on a 5 pin mini-XLR Male connector
Digital Audio Output• electronically balanced on 3 pin mini-XLR Male connector
• AES3 @ 48 kHz

[*] RMS value, 22 Hz / 22 kHz, unweighted

- WISYCOM MTP41S :

Switchable channels2400 allocated by 40 groups of 60 channels (in specific frequency range), quickly selectable with dedicated buttons
Switching windowUp to 232 MHz, depending on band
1 470 ÷ 640 MHz
2 566 ÷ 798 MHz
3 510 ÷ 698 MHz
FrequenciesQuartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability± 2,5 ppm (in the rated temperature range)
Temperature range-10 ÷ +55 °C
Max RF power50 mW (ERP) when high power selected
10 mW (ERP) when low power selected
Spurious emissions< 2 nW
Modulationwideband FM, with 50 µs pre-emphasis
Nominal deviation±40 kHz (Peak deviation = ±56 kHz)
Telemetry featureMTP41 transmits also a digitally modulated sub-carrier, suitable for: tone-squelch operating remote battery monitoring optional PTT (push to talk) operation
AF input connector LEMO optionConfigurable on ‘mic’ display menu in 3 options:
’2 wires’: gain selectable -40 ÷ +40 (-54 dBu ÷ +26 dBu peak), no bias voltage
‘2 wires + bias’: gain selectable -20 ÷ +40 (-54 dBu ÷ + 6 dBu peak), 5.5 V on 4k7 bias supply
‘3 wires: gain selectable -40 ÷ +40 (-54 dBu ÷ +26 dBu peak)
AF input level :
80 dB adjustable range from -60 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max. input level+26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Noise-ReductionENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth45 Hz ÷ 21 KHz (3dB)
55 Hz ÷ 20 KHz (1dB)
Distortion< 0.3 % (0.15 % typ.)
Signal-to-noise ratiotyp. 115 dB (A)rms with 40 kHz deviation
typ. 121 dB (A)rms with 56 kHz deviation
LedLed indication with bicolor led (red & green) on wireless power switch:
Wireless transmission status: GREEN on/off
Modulation peek (if activated): RED
Battery lifetime status: GREEN - steady (> 25%) - slowly blinking (< 25%) - quickly blinking (<12%)
Ptt status: RED if active
DisplayHigh contrast OLED (Organic light-emitting diode) bicolor display (96 x 36 pixels)
8 step battery lifetime indication: 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT functionPin 3 of the AF connector can be setup to an external push button
Power supply1 AA size batteries (Alkaline, rechargeable NiMH)
Battery lifeapprox. 5 hours @ 50mW continuous working
approx. 7 hours @ 10mW continuous working
WeightApprox. 75 g. without batteries
Accept

Site use cookies